Blaupunkt BOSCH GRUPPE RMD 169 - Manual (Page 31)

66
Selecting a quality factor for the bass
or mid-range
• Press / repeatedly until “LO-Q-
FAC” or “HI-Q-FAC” appear in the dis-
play.
• Press << or >> once or several times
in order to set the quality factor (Q-
FACT 1 to Q-FACT 3).
• Press / to save the selected factor
and return to the DPE main menu.
or
• Press DPE or EXIT to save the select-
ed factor and to close the DPE main
menu.
Selecting the preset sound setting
Selecting a preset influences the equalizer
and sound settings of the unit. Each select-
ed preset can be adjusted manually. When
a different preset is selected, however, the
factory default setting is restored. Your per-
sonal sound settings for BASS, TREBLE,
EQ and LD are stored in the “USER” preset
mode.
To call up the presets:
•
Press / repeatedly until “PRESET”
appears on the display.
• Press << or >> once or several times
to select the (*USER* ... VOCAL)
equalizer settings.
• Press / to save the selected equal-
izer setting and return to the DPE main
menu.
or
• Press DPE or EXIT to save the select-
ed equalizer setting and to close the
DPE main menu.
To activate/deactivate the equalizer, hold
AUD down for approx. 2 seconds.
This enables you to compare the sound with
and without equalizer.
Equalizer setting