Beko DFN 1000 X - Manual (Page 25)

24 GB
Canceling a programme
You need to perform a canceling
operation if you want to end a
programme before it is over. To cancel
a programme:
Deactivate the key lock if it is active.
“Paused” is displayed if you press the
Start/Pause/Cancel key when the key
lock is deactivated. If you continue to
keeping the Start/Pause/Cancel key
pressed, the countdown of 5 seconds
starts and the following messages are
displayed consecutively:
“Cancel 5”
“Cancel 4”
“Cancel 3”
“Cancel 2”
“Cancel 1”
“Cancel”
Release the key at the end of the
countdown.
The message
“Cancelling”
is displayed for 45 seconds during the
discharge operation.
“Cancelled”
will be displayed when the operation
is completed. In this case, you can
turn off your machine with the “On/Off”
key or make it ready for the next cycle
by pressing the “Start/Pause/Cancel”
button.
WARNING:
There might be residues of detergent
or rinse aid in the machine and/or on
the pieces already washed depending
on the step the cancelled programme
was in at the end of such cancellation.
Programme Step Follow-up
You can follow up the washing step of
the current programme by means of the
warning notes on the display.
“Washing”
is displayed for the steps at which
the food remnants are removed or a
washing with detergent is made.
The degree of soiling of the dishes is
determined by measuring the degree
of soiling in the washing water by
means of the cleanliness sensor.
The cleanliness sensor determines
what to do in the following steps by
measuring the degree of soiling of the
water regularly. Washing temperature,
washing time, washing pressures and
water amount is adjusted on basis
of the information received from the
cleanliness sensor. This programme is
developed to avoid unnecessary water
and energy consumption by washing
the dishes in the most appropriate
conditions for the degree of soiling of
the dishes.
“Analysing”
is displayed during the decision steps.
The analysis is made during the first
10-30 minutes at the beginning of the
washing depending on the temperature
of the mains water, dissolution rate of
the dirt and level of soiling of the dishes.
Analysis takes less time for lightly soiled
dishes, but more time for heavily soiled
dishes. Cleaning operation continues
during the analysis steps.