Briggs & Stratton 074001 - Manual (Page 8)

OPERATION
8
Air Compressor Operating Location
Locate the air compressor in a clean, dry and well-ventilated
area for operation.The air compressor should be placed at
least 12 inches (30 cm) away from walls or other
obstructions that could interfere with airflow.
The air compressor pump and shroud are designed to allow
for proper cooling.The ventilation openings on the
compressor are necessary to maintain proper operating
temperature. DO NOT place rags or containers on or near
these openings.The air filter must be kept clear of
obstructions that could reduce airflow to the air compressor.
If you have any problems with the operation of your air
compressor, call the air compressor helpline at
1-800-743-4115. If calling for assistance, please have the
model, revision, and serial number from the data tag available.
Grounding Instructions
1. The cord set and plug supplied with this unit contains a
grounding pin.This plug MUST be used with a grounded
outlet.
2. Make sure power outlet being used has same
configuration as air compressor’s plug (see Figure 4).
DO NOT USE A GROUND ADAPTER!
3. Inspect plug and cord before each use. DO NOT use
compressor if there are signs of damage.
4. If these grounding instructions are not completely
understood, or if in doubt that air compressor is
correctly grounded, have installation checked by a
qualified electrician.
• DO NOT use grounding adapters.
• DO NOT modify the plug provided. If it does not fit the
available outlet, a qualified electrician should install a proper
outlet.
• A qualified electrician MUST make repairs to the cord set or
plug.
Improper grounding can result in electrical shock.
WARNING
Figure 4 - Correctly Rated 15 AMP Power Duplex Outlet