BT 150 - Manual (Page 16)

Paging
You can use the button on the Baby unit to find the Parent
unit. This will also reset the speaker volume level, in case it has
been switched off.
1. Press on the Baby unit. If the Parent unit volume was set
to off, this will automatically reset the volume to the default
volume. The paging alert will sound.
2. To stop the Page alert, press any button on the Parent unit, or
press again on the Baby unit. If no button is pressed, the
paging tone will stop after 2 minutes.
The Parent unit menu
The button on your Parent unit can be used to select and
change the settings on the Baby unit without having to risk
disturbing your baby.
You can access the settings by:
1. Press then or to scroll through the options.
Then press to confirm your choice.
2. Pressing again will exit the current menu option or the
unit will return to idle.
16 Using your BT Baby Monitor 150
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 16