BT 150 - Manual (Page 20)

If you set the sensitivity level too low,
only louder sounds in the baby’s room
will be picked up and communicated
back to you via the Parent unit. The
Unit will not pick up quieter
background noises.
The default sensitivity setting is Level
5 – the microphone is permanently on.
Sound level visual indicator
The noise level from baby’s room is
indicated by the LEDS on the Parent
unit. So even if the loudspeaker is turned
down, you can be alerted visually.
There are 7 LEDs noise indicators - 4
green and 3 red - covering a range of
noise levels from 0dB up to 40dB.
Alert tone and vibrating when the
loudspeaker is off
If the Parent unit loudspeaker is turned
off, and the noise level from baby’s
room reaches the 2nd red LED level, the
unit will beep and vibrate to alert you.
You can switch the sound and vibrate
alert settings on or off. The default
setting for both is on.
Select sensitivity level
1. Press scroll to
Sensitivity
. Press .
2. Press or to select the level (1-5) you want. Press .
3. Press to return to the standby display.
Switch sound alert on or off
1. Press scroll to
Sound alert
. Press .
2. The current available option will be displayed, either
Alert
on?
or
Alert off?
Press to select the option displayed.
3. Press to return to the standby display.
Switch vibrate alert on or off
1. Press scroll to
Vibrate
. Press .
2. The current available option will be displayed either
Vibrate
off?
or
Vibrate on?
Press to select the option displayed.
3. Press to return to standby.
20 Using your BT Baby Monitor 150
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
If you experience any problems, please call the Helpline on 0808 100 6554*
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 20