Toshiba Equium A80 - Manual (Page 51)

Toshiba A80 2-2
The Grand Tour
DC-In LED The DC-IN LED indicates the computer is
connected to the AC adapter and it is plugged into
an AC power source.
Power LED The Power LED flashes amber while the system
is in Standby mode. The LED turns off when the
computer is turned off or in Hibernation mode. In
normal operating mode, the LED is blue.
Battery LED The Battery LED indicates the battery's current
charge/discharge status. It lights blue when the
battery is fully charged. It lights amber while the
battery is being charged from the AC adapter. It
flashes amber when the battery capacity is low.
Hard Disk Drive LED The Hard Disk Drive LED glows blue when the
computer is accessing the hard disk.
Infrared port This Infrared port is compatible with Infrared Data
Association (IrDA) Fast InfraRed (FIR) standards.
It enables cableless 4 Mbps data transfer with IrDA
1.1 compatible external devices.
(This function is available depending on the model
you purchased.)
Wireless
Communication LED
The Wireless Communication LED lights up
when he wireless LAN is on.
(This function is available depending on the model
you purchased.)
Wireless
Communication
Switch
The Wireless Communication Switch turns on
the wireless networking transceiver.
(This function is available depending on the model
you purchased.)
Headphone Jack The Headphone Jack lets you connect stereo
headphones or other audio-output devices, such
as external speakers. Connecting headphones or
other devices to this jack automatically disables
the internal speakers.
Microphone Jack A standard 3.5 mm mini microphone jack enables
connection of a three conductive type mini-jack for
a monaural microphone.
Volume Control Use this dial to adjust the volume of the stereo
speakers.
The audio speakers. Volume can be controlled
either with the volume dial on the front side of the
computer, or with the Volume setting in
Windows XP.
Off On