Toshiba Equium A80 - Manual (Page 85)

Toshiba A80 4-8
Operating Basics
Wireless communication switch
You can enable or disable wireless LAN function, with the on/off switch. No
transmissions are sent or received when the switch is off. Slide the switch
forward to turn it on and backward to turn it off.
Wireless communication LED
The LED indicates the status of the wireless communication functions.
Using optical media drives
The illustrations in this section might differ slightly from your drive, but
operation is the same for all optical media drives. The full-size drive provides
high-performance execution of CD/DVD-ROM-based programs. You can run
either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without an adaptor. An ATAPI
interface controller is used for CD/DVD-ROM operation. When the computer
is accessing a CD/DVD, an indicator on the drive glows.
If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs on
CD-RW/DVD-ROM drive section for precautions on writing to CDs.
If you have a DVD±R/±RW drive, refer also to the Writing CD/DVDs on
DVD±R/±RW drive section for precautions on writing to CDs.
If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on
DVD Super Multi drive section for precautions on writing to CDs.
If you have a DVD-ROM drive, you only can read DVD and CD from your
driver but no write capability to writable DVD or CD format.
Turn the switch off in airplanes and hospitals. Check the LED. It stops
glowing when the wireless communication function is off.
LED status Indication
LED off Wireless communication switch is set to off
LED glows Wireless communication switch is on
Use the WinDVD 5 application to view DVD-Video discs.