Set up procedure, Windows logon via fingerprint authentication – Toshiba SATELLITE P500 User Manual

Page 84

Advertising
background image

User’s Manual

4-7

Operating Basics

Set up procedure

Please perform the following procedure when first using fingerprint

authentication.

Fingerprint registration

Enroll the required authentication data using the Fingerprints Enrollment

Wizard.

1. Click Start  All Programs  TrueSuite Access Manager, or double

click the icon in the Task Bar. The Enter Windows Password screen is

displayed.

2. Enter a password into the Enter Windows Password field and click

Next. The Control Center screen is displayed.

3. Click the non-enrolled finger icon above the finger. The Fingerprint

Enrollment screen is displayed.

4. Confirm the message and click Next. The Scanning Practice screen is

displayed.

5. You can practice swiping your finger. When you have finished practicing

swiping your finger, click Next. The Fingerprint Image Capture screen is

displayed.

6. Follow the onscreen instructions and use the same finger you have

selected under the Control Center to swipe your finger with good

images three times for the fingerprint template to be created.

7. In case of finger injury or authentication failure, it is recommended that

you enroll another fingerprint. The following message will be displayed:
[We recommended enrolling at least two fingerprint

images.] Click OK and repeat steps 3, 4, 5 and 6 with another finger.

Windows logon via fingerprint authentication

In place of the usual Windows logon by ID and password, fingerprint

authentication also allows logon to Windows.
This is especially useful when many users are using the computer, as user

selection can be skipped.

Fingerprint authentication procedure

1. Start up the computer.
2. The Logon Authorization screen is displayed. Choose any of the

enrolled fingers and swipe the fingerprint on the sensor. If

authentication is successful, the user will be logged on to Windows.

The fingerprint authentication uses the same Windows logon ID and

password. If the Windows logon password has not been setup, please

do so before registration.

Up to 30~34 fingerprint patterns can be registered.

Advertising