Section, Tv output signal – Toshiba Satellite P100 (PSPAD) User Manual
Page 131
User’s Manual
9-13
Troubleshooting
USB
Refer also to your USB device’s documentation.
TV output signal
The mouse pointer
moves too fast or too
slow
Try changing the speed setting in the mouse
control utility.
1. To access this utility, click
, Control Panel,
Hardware and Sound, then Mouse icon.
2. Within the Mouse Properties window, click
the Pointer Options tab.
3. Set the pointer speed as required and click
OK.
The mouse pointer
moves erratically
The mouse might be dirty. Refer to your mouse
documentations for instructions on cleaning.
If problems persist, contact your dealer.
Problem
Procedure
Problem
Procedure
USB device does not
work
Check for a firm cable connection between the
USB ports on the computer and the USB device.
Make sure the USB device drivers are properly
installed. Refer to your Windows documentation
for information on checking the drivers.
If problems persist, contact your dealer.
Problem
Procedure
Display on TV is poor
Make sure the TV type is correct for your area:
NTSC (US) or PAL (Europe).
No display
Try adjusting the contrast and brightness controls
on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5,
If problems persist, contact your dealer.
If you turn the computer off in Sleep Mode while the display is on TV, the
computer will select either the internal LCD or an external computer CRT
as the display device.