When writing or rewriting – Toshiba Satellite P100 (PSPAD) User Manual
Page 72
4-16
User’s Manual
Operating Basics
TOSHIBA has confirmed the operation of CD-R and CD-RW media of the
manufacturers above. Operation of other media cannot be guaranteed.
■
CD-RW can generally be rewritten about 1,000 times. However, the
actual number of rewrites is affected by the quality of the media and the
way it is used.
■
Be sure to connect the universal AC adapter when you write or rewrite.
■
Be sure to close all other software programs except the writing
software.
■
Do not run software such as a screen saver which can put a heavy load
on the CPU.
■
Operate the computer under the power scheme High Performance. Do
not use power-saving features.
■
Do not write while virus check software is running. Wait for it to finish,
then disable virus detection programs including any software that
checks files automatically in the background.
■
Do not use hard disk utilities, including those intended to enhance Hard
Disk Drive access speed. They may cause unstable operation and
damage data.
■
Write from the computer’s Hard Disk Drive to the CD. Do not try to write
from shared devices such as a LAN server or any other network device.
■
Writing with software other than Sonic RecordNow! has not been
confirmed. Therefore, operation with other software cannot be
guaranteed.
When writing or rewriting
Note the following when you write or rewrite a CD-R or CD-RW.
■
Always copy data from the Hard disk drive to the CD. Do not use cut-
and-paste. The original data will be lost if there is a write error.
■
Do not perform any of the following actions:
■
Change users in the Windows
®
Vista operating system.
■
Operate the computer for any other function, including use of a
mouse or TouchPad, closing/opening the LCD panel.
■
Start a communication application, such as a modem.
■
Apply impact or vibration to the PC.
■
Install, remove or connect external drives, including the following:
PC card, USB devices, external display, i.LINK devices, optical
digital devices.
■
Open the optical disc drive.
■
Do not use shut down/log off and sleep/hibernation while writing or
rewriting.
■
If the media is poor in quality, dirty or damaged, writing or rewriting
errors may occur.