Toshiba Magnia 7100 - Manual (Page 44)

36
Setup
Setup Option (Windows NT 4.0 Quick Installation)
Setup Option
After you have specified the installation options for 'Services and Application', the Setup
Option screen appears. Use this screen to specify the setup installation features you want
enabled during the installation process.
Setup Option screen
Select any of the following features that you want to activate:
Beep sound in case of disk change
Emits an audible alert (beep) to change storage media (CD-ROM and diskette).
Start installation according to parameter settings at boot time
The next time the SST starts, installation begins automatically after a confirmation message,
using the configuration information currently stored on the Startup Disk. If this option is not
selected, the SST starts normally at the Main Menu.
Confirm partition information during the installation procedure
A dialog box is displayed requiring you to confirm the deletion of the existing partition.
If a disk partition already exists, a confirmation message is displayed asking if you want to
delete the partition. If this option is not checked, setup deletes the partition without prompting
you for confirmation.
NOTE: If you have an existing partition (such as Windows2000 or Windows NT), the partition is
firstdeleted before installation.