Toshiba Magnia 7100 - Manual (Page 65)

53 HW Diagnostics
Diagnostics Test
Diagnostics Test (01. DIAGNOSTIC TEST)
1. From the 'Diagnostics Test Menu' (DIAGNOSTIC TEST MENU) screen, select the desired
subtest number from the subtest menu. (To return to the 'Main Menu', select "99" or
"Esc".)
01 MEMORY TEST
02 KEYBOARD TEST
03 DISPLAY TEST
04 FLOPPY DISK TEST
05 PRINTER TEST
06 SCSI HDD TEST
07 NPX TEST
08 CACHE MEMORY TEST
09 SCSI TEST
10 CD-ROM TEST
11 SAF-TE TEST
12 SMC TEST
99 EXIT to DIAGNOSTICS MENU
2. After selecting the desired subtest, the following message appears.
(For more detailed information on each item, refer to [Chapter 4 Diagnostics Test – Details
of test items and Error log information]):
Diagnostics TEST - TEST PARAMETER
[01.Go to Test]
Start the test. To stop the test program, press <Ctrl> + <Break>.
[02.Test Loop]
Selecting "YES" restarts the test cycle and increments the pass counter each time the
test cycle ends.
Selecting "NO" returns the subtest menu to the main menu after the test is completed.
[03.Error Stop]
Selecting "YES" stops the test program when an error is detected.
Selecting "NO" keeps the test running even if an error is detected.