Sharp KC-A60EU W - Manual (Page 19)

E-17
ENGLISH
SYMPTOM REMEDY (not a malfunction)
When the Roller / Float was removed. • Install the Roller / Float in order below.
AUTO RESTART
After a power failure, automatically resume
the operation when the power recovers.
Auto Restart can be set.
• Even when the plug is unplugged or the breaker is
thrown during the operation, the operation resumes
at the previous operation mode and settings if the
power recovers.
FLOAT ROLLER
1. Insert the fl oat under
this tab.
2. Inner the tab
of fl oat into
the hole.
3. Insert the tab on the other
side of the fl oat into the
hole.
Fix the roller in the tray from side way.
NOTE
Check the direction
of the roller.
Float
Tab
Float
Cross-Section view
(with the unit OFF)
ON
(with the unit OFF)
CANCELLATION
(simultaneously for more 3 sec.)
If the , , lamp lights up
for 10 seconds, the setting is
complete.
(simultaneously for more 3 sec.)
OM_KC-A60EU_EN.indd Sec1:17 OM_KC-A60EU_EN.indd Sec1:17 12/4/12 9:42 AM 12/4/12 9:42 AM