Sharp AY-XPC12RR-AE-X12RR - Manual (Page 12)

GB-10
When the 1.2.3.5h OFF TIMER is set, the
unit will automatically turn off after the set-
ting hours.
1
Press the 1.2.3.5h OFF TIMER but-
ton to set the desired time.
• The orange TIMER lamp ( ) will light up.
• The remaining time will be indicated on
the remote control in 1-hour increments.
TO CANCEL
Press the SET/C button.
Alternatively, press the 1.2.3.5h OFF
TIMER button.
• The orange TIMER lamp ( ) will turn off.
NOTE:
• The 1.2.3.5h OFF TIMER has priority over
TIMER ON and TIMER OFF.
• If the 1.2.3.5h OFF TIMER is set while the unit
is not operating, the unit will operate at the
formerly set condition and stop after a period
of set time.
• If TIMER ON and/or TIMER OFF are set,
TIMER CANCEL button cancels every setting.
TIMER OFF
1
Press the TIMER OFF button.
• The TIMER OFF indicator ( ) will
blink.
2
Press the TIME ADVANCE or RE-
VERSE button to set the desired
time.
• The time can be set in 10-minute incre-
ments.
3
Press the SET/C button.
• The orange TIMER lamp ( ) will light
up.
NOTE:
• When the TIMER OFF is set, the temperature
setting is automatically adjusted to prevent
the room from be coming excessively cold
or warm, for example while you sleep. (Auto
Sleep function)
COOL mode: One hour after the timer is set,
the temperature setting rises by 1°C.
HEAT mode: One hour after the timer is set,
the temperature setting drops by 3°C.
1
CANCEL
1.2.3.5h OFF TIMER
CANCEL
TIMER OPERATION
3
2
1
RR_OM_10_lang.indb GB-10 RR_OM_10_lang.indb GB-10 2014-02-21 08:53:33 2014-02-21 08:53:33