Sharp AY-XPC12RR-AE-X12RR - Manual (Page 14)

GB-12
SELF CLEAN operation will reduce the
growth of mold fungus with Plasmacluster
ions and dry inside of the unit. Utilize the
operation at seasonal change over terms .
1
Press the SELF CLEAN button when
the unit is not operating.
• The remote control will display “ ”.
(The “ ” will disappear automatically in
1 minute.)
• The green SELF CLEAN lamp ( ) and
the blue PLASMACLUSTER lamp ( )on
the unit will light up.
• The unit will stop operation after 40 min-
utes.
TO CANCEL
Press the STOP button.
• The green SELF CLEAN lamp ( ) and
the blue PLASMACLUSTER lamp ( )will
turn off.
NOTE:
• You cannot set the temperature, fan speed, air
fl ow direction or timer setting during the SELF
CLEAN operation.
• Mold fungus already grown can not be
eliminated by this operation.
SELF CLEAN OPERATION
Press the DISPLAY button when the lamps
on the unit are too bright. (The green OP-
ERATION lamp and the orange TIMER
lamp cannot be turned off.)
1
During operation, press the DIS-
PLAY button.
• The blue PLASMACLUSTER lamp ( )
and/or the orange FULL POWER lamp
(
)will turn off.
TO LIGHT UP
Press the DISPLAY button again.
DISPLAY BUTTON
1
1
RR_OM_10_lang.indb GB-12 RR_OM_10_lang.indb GB-12 2014-02-21 08:53:34 2014-02-21 08:53:34