Sharp ER-A280F - Manual (Page 156)

154
■ Folder creating
The master folder can be created for the data file.
(¥ SHARP¥ ECRXXX06¥ nnnnnnnn¥ : nnnnnnnn/folder code)
(1) Select the [FOLDER CONTROL] menu and press the
e
key in the “SD CARD” mode, the FOLDER
CONTROL window is displayed.
(2) Select the [CREATE FOLDER] menu and press the
e
key, the folder code entry window is displayed.
(3) Enter the required folder code and enter the
e
key.
To cancel the operation, press the
C
key.
■ Data saving
The sales data, EJ data, T-LOG data or programming data can be saved to the SD card.
(1) Select the [SAVING] menu and press the
e
key in the “SD CARD” mode, the selection window “SAVE
or SAVE FOR ONLINE” is displayed.
1. SAVE:
Saves data (The Electronic Journal or T-LOG data must be manually deleted
by “Data Clear” operation in the PGM2 mode.)
2. SAVE FOR ONLINE: Saves and adds data to existing file and clears the data at the register
Select the operation “SAVE” or “SAVE FOR ONLINE” and press the
e
key, the following data list
window is displayed.
(2) Select the data menu from the list and press the
e
key, the confirmation window is displayed.
To save the required data file, select the [OK] menu and press the
e
key.
To cancel the operation, select the [CANCEL] menu and press the
e
key.
■ Data loading
The programming data can be loaded from the SD card.
(1) Select the [LOADING] menu and press the
e
key in the “SD CARD” mode, the selection window “IND.
PROGRAM/ ALL PROGRAM” is displayed.
(2) Select the data menu from the list and press the
e
key, the confirmation window is displayed.
To load the programming data file, select the [OK] menu and press the
e
key.
To cancel the operation, select the [CANCEL] menu and press the
e
key.
Procedure
Procedure
Procedure
Text Data list
SALES DATA Sales data
EJ DATA Electronic journal data
T-LOG DATA T-LOG data file
Select the individual programming data:
IND. PROGRAM
DEPARTMENT,
PLU/EAN,
GRAPHIC LOGO
ALL PROGRAM All programming data
Text Data list
Select the individual programming data:
IND. PROGRAM
DEPARTMENT,
PLU/EAN,
GRAPHIC LOGO
ALL PROGRAM All programming data
ER-A280F_N(SEEG)(E)-8 09.6.18 6:55 AM Page 154