Sharp ER-A280F - Manual (Page 23)

Selecting an Operating Mode
When you turn the register on and press the
m
key, the mode selection window will appear on the display,
listing available operating modes as shown below.
Mode selection window
Operating Modes
You can select any mode other than REG from the list in the mode selection window. Your register supports
the following operating modes:
This mode allows you to enter various sales information. The mode selection window does
not list this mode. To select this mode from the mode selection window, press the
C
key.
This mode allows servers to take X or Z reports on their sales information.
This mode locks all operations of the register. When you select this mode, the window will
disappear. Pressing any key turns the register ON.
This mode is used to take various daily total reports (X1/Z1 reports).
This mode is used to take various weekly or monthly reports (X2/Z2 reports).
This mode allows you to program those items which need to be changed often such as
unit prices and discount percentages.
This mode allows you to program those items which can be programmed in the PGM1
mode and do not require frequent changes such as date, time, and terminal functions.
This mode allows you to program AUTO menu key and automatic sequencing keys.
This mode allows you to save and load the data of your register to and from an SD card.
REG mode
OP XZ mode
OFF mode
X1/Z1 mode
X2/Z2 mode
PGM1 mode
PGM2 mode
AUTO KEY mode
SD CARD mode
21
2
ER-A280F_N(SEEG)(E)-2 09.6.18 6:50 AM Page 21