Function parameters for, Key function – Sharp XE-A137-BK User Manual
Page 50
48
■
Function parameters for
R
,
t
,
C
,
c
and
A
key function
ABC
A
To program “0” for all items
To program for another key
*
1
:Press
s
key for
A
key setting.
@
s
,
C
,
c
,
R
or
t
*
1
Item:
Selection:
Entry:
A
Footer printing*
2
Allow
1
Disallow*
0
B
Amount tendered entry*
2
Compulsory
1
Non-compulsory (for
C
and
A
)* 0
Inhibit (for
c
)*
0
C
Entry digit limit
For
C
,
c
and
A
0-8 (default: 8)
For
R
and
t
0-9 (default: 9)
*2: When programming for
R
or
t
, always enter 0 for item(A) and item(B)
Footer printing (only for
C
,
c
and
A
)
• This programming decides whether or not the machine should print a message at the foot of a receipt when
a specified media key is used. With regard to programming method of footer logo message, refer to “Logo
messages” section.
Amount tendered entry (only for
C
,
c
and
A
)
• You may select amount tendered, compulsory or optional, for the
C
, and
A
keys.
• You may select amount tendered, compulsory or inhibited, for the
c
key.
Entry digit limit
• For the
C
,
c
,
R
and
t
keys program upper limit entry amount for the tendered amount.
For the
A
key, program upper limit entry for total cash amount which can be handled on the register.
The entry digit limit is represented by the number of allowable digits for the maximum entry or total amount.
When “0” is set, the operation of the corresponding key is prohibited.
NOTE
This function is activated, when “HALO function; valid” (job code 62 on page 55) is programmed.
Example
Key operation
018
@
C
A
From left, ABC