Sharp XE-A137-BK - Manual (Page 54)

52
ADVANCED FUNCTION PROGRAMMING
1 Register Number and Consecutive Number Programming
The register number and consecutive numbers are printed on every receipt.
When your store has two or more registers, it is practical to set separate register numbers for identification. The
consecutive number is increased by one each time a receipt is issued.
For consecutive number programming, enter a number (max. 6 digits) that is one less than the desired starting
number.
■
Register number
s A Register number (one to six digits)
To set the register number “0”
@ s 1
Example
Key operation Print
s 1 @
123456 s A
Register number
■
Consecutive number
2 s @ s A
A number (one to six digits) that is one
less than the desired starting number
To begin the count from 000001
Example
Key operation Print
s 2 @
100000 s A Consecutive
number