Neff C47D22N3GB - Manual (Page 11)

11
Electronic clock
In this section, you can read about
■
how to set the timer
■
how to switch off your appliance automatically
■
how to switch your appliance on and off automatically
(preset operation)
■
how to set the time
Clock display
Notes
■ When you set a clock function, the time interval increases
when you set higher values (e.g. a cooking time of up to
‚ : ‹‹œ can be set exactly to the minute, more than ‚ : ‹‹œ in
intervals of 5 minutes).
■
For the clock functions Q Timer, x Cooking time and y
Preselection mode, an audible signal sounds and the Q or
y symbol flashes after the settings have elapsed. To cancel
the audible signal before it ends, press the KJ clock
function button.
■
Briefly press the KJ clock function button to select a clock
function. You then have 3 seconds to set the selected clock
function. After this time, the setting mode is exited
automatically.
Switching the clock display on and off
1. Press and hold the
KJ clock function button for 6 seconds.
The clock display switches off. If a clock function is active,
the associated symbol remains lit.
2. Press the KJ clock function button briefly.
The clock display switches on.
Timer
1. Press the KJ clock function button repeatedly until the KJ
and Q symbols light up.
2. Set the duration using the rotary selector (e.g. † : ‹‹ minutes).
The setting is applied automatically. Then the clock is
displayed again and the minute minder starts counting down.
Cooking time
Automatic switch-off after a cooking time setting has elapsed.
1. Set the operating mode and temperature.
A default cooking time is displayed on the electronic clock.
The KJ and x (cooking time) symbols light up.
2. Set the cooking time with the rotary selector
(e.g. ‚ : „‹ hours).
The new cooking time is saved automatically after 3 seconds.
3. Press the Start button.
The appliance heats up.
In the é Steam cooking operating mode, the cooking time
does not start counting down until the heating up time has
finished.
Once the cooking time has elapsed, the appliance switches off
automatically.
1. Turn the operating mode selector back to the
Û position.
2. Press the KJ clock function button to exit the clock function.
Preset operation
The appliance switches on automatically, then switches off
automatically at the time preselected for the end of operation.
Bear in mind that food that spoils easily must not stay in the
cooking compartment for too long.
Preselection mode is not possible with some of the automatic
programmes.
&ORFN IXQFWLRQ EXWWRQ 5RWDU\ VHOHFWRU
Clock function Use
Q Timer You can use the timer as an egg timer or a kitchen timer. The appliance does not switch
on or off automatically
x Cooking time The appliance switches off automatically after a cooking time setting has elapsed (e.g.
‚ : „‹ hours)
y Preset operation The appliance switches on and off automatically
3 Clock Setting the clock