Neff C47D22N3GB - Manual (Page 16)

16
Caution!
Risk of surface damage: If descaler comes into contact with the
front of the appliance or any other sensitive surfaces, wash it off
immediately with water.
Remove food residues from the cooking compartment as soon
as the appliance has cooled.
Salts are very corrosive and can cause rust. Remove remains
of acidic sauces (ketchup, mustard) or salted food from the
cooking compartment immediately after cooling.
Do not use hard scouring pads or cleaning sponges.
cleaning agents
Cleaning sponge
The enclosed cleaning sponge is very absorbent. Use the
cleaning sponge only for cleaning the cooking compartment
and for removing residual water from the evaporator dish.
Wash the cleaning sponge thoroughly before using for the first
time. You can wash the cleaning sponge in the washing
machine (hot wash).
Microfibre cloth
The honeycomb microfibre cloth is particularly suitable for
cleaning sensitive surfaces such as glass, glass ceramic,
stainless steel or aluminium (product no. 460 770, also
available from our online eShop). It removes liquid and greasy
deposits in one go.
Descaling
The appliance must be descaled at regular intervals in order for
it to continue operating correctly. The Ê indicator reminds you
to do this.
You can only dispense with descaling completely if you
exclusively use softened water.
The descaling operation consists of:
■
Descale (approx. 30 minutes), then refill the water tank and
empty the evaporator dish
■
1st rinse (20 seconds), then empty the evaporator dish
■
2nd rinse (20 seconds), then remove the remaining water
All three steps must be completed in full. The appliance is
ready for operation again only after the 2nd rinse.
Descaler
Only use the liquid descaler recommended by the after-sales
service for descaling (product no. 311 138, also available
online from the eShop). Other descalers may damage the
appliance.
1. Prepare a descaling solution by mixing 300 ml water and
60 ml liquid descaler.
2. Empty the water tank and fill with descaling solution.
Caution!
Risk of surface damage: If descaler comes into contact with the
front of the appliance or any other sensitive surfaces, wash it off
immediately with water.
Starting descaling
The cooking compartment must have cooled down completely.
1. Press the operating mode selector to make it pop out.
The appliance switches on.
2. Turn the operating mode selector to Í Descale.
3. Slide in the water tank containing the descaling solution and
close the appliance door.
4. Press the Start button.
The descaling process starts. The light in the cooking
compartment remains switched off.
Appliance exterior (with aluminium front) Use soapy water and dry with a soft cloth.
Mild window cleaning agent - wipe over the aluminium front horizontally and without
applying pressure using a soft window cloth or a lint-free microfibre cloth.
Appliance exterior (with stainless steel
front)
Use soapy water and dry with a soft cloth.
Always remove flecks of limescale, grease, starch and albumin (e.g. egg white) imme-
diately. Special stainless steel cleaning agents can be obtained from the after-sales
service or from specialist retailers.
Cooking compartment interior with evapo-
rator dish
Hot, soapy water or a vinegar solution ­ use the enclosed cleaning sponge or a soft
washing-up brush.
Caution!
The cooking compartment could rust.: Do not use steel pads or scourers.
Water tank Soapy water - do not clean in the dishwasher.
Tank recess Rub dry after every use
Seal in the water tank lid Thoroughly dry after every use
Rails See section: Cleaning the rails
Door panels See section: Cleaning the door panels
Caution!
Risk of surface damage: After cleaning, wipe the door panels with glass cleaner, then
dry. Otherwise, stains will be caused that will not be able to be removed.
Door seal Hot soapy water
Accessories Soak in hot soapy water. Clean with a brush or washing-up sponge or in the dish-
washer. If the rails are discoloured by starchy foods (e.g. rice), clean them with a vine-
gar solution.