Black Box LR5100A-T - Manual (Page 43)

Applications
35
If during this learning process the maximum number of remote sites has been
reached, the router will prompt you that there are no remote sites available. A new
remote site cannot be auto-created unless one of the existing remote sites is
manually deleted.
Auto-learning with PPP encapsulation enabled (see following page) may not be
compatible with some older model routers. If problems with auto-learning occur with
PPP enabled, try disabling PPP encapsulation.
Manual Configuration - LMI Type
The LMI Type option allows you to manually specify the type of Link Management
Interface in use by the Frame Relay service provider for the Frame Relay service.
When the LMI type is set to none, the router simply creates frame relay packets and
sends them on the defined PVC’s. The links are not checked for errors. There is no
congestion control checking. The link is only monitored for control signals.
To manually configure the LMI type the Auto-Learning option must be disabled.
Auto-Learning
Location: Main
Ä
Configuration
Ä
WAN Set-up
Ä
Link Set-up
Ä
Frame Relay Set-up
Ä
Auto-learning
Enabled
LMI Type
Location: Main
Ä
Configuration
Ä
WAN Set-up
Ä
Link Set-up
Ä
Frame Relay Set-up
Ä
LMI Type
The configuration options described here are only for initial set-up and configuration
purposes. For more complete information on all of the configuration parameters
available please refer to the “Menus Reference Manual” file on the accompanying
CD-ROM.
7
7