Belkin ScreenCast AV4 - Manual (Page 19)

If connection was successful, you will see a screen similar to
the one below.
If connection failed, you will see a screen like the one below:
Tip: To improve the range of the transmitter, you can move it so
that there are fewer barriers (like walls or cabinets) between it and
the receiver. You may find that a simple shift of the product a few
inches or feet will bring you to the desired level of connectivity.
note: It is possible to initiate connection with a new transmitter by
pressing the “Pair” button on the back of the receiver. The “Pair”
button might be labeled “Connect” on some models. After pressing the
button on the receiver, walk to the transmitter and press the same
Pair/Connect button there.
17
sCReenCasT aV seTTInGs