Belkin ScreenCast AV4 - Manual (Page 5)

3
GeTTInG sTaRTeD
screenCast aV 4 Transmitter
neeD HIGH Res IMaGes
(A)(B) (C) (D)(E)(F)(G)(H)
Transmitter:
A. Video source select button
• Allows you to cycle between video products
that you have connected
B. Pairing button for syncing with other ScreenCast receivers
• Allows you to add additional ScreenCast receivers
C. HDMI inputs 1/2/3/4
• This is where you connect your HDMI source devices like
Blu-ray ™ disc players, game consoles, or cable/satellite boxes.
D. IR emitter port (3.5mm jack)
• This is where you will connect the IR cable that will
help you control your AV source devices.
E. USB port
• This is for future product upgrades.
F. Reset button
• If you press this button for less than 5 seconds,
the ScreenCast transmitter will restart.
• If you press this button for more than 5 seconds, the
ScreenCast transmitter will be restored to factory defaults.
It will need to be paired again with your receiver.
G. Power input
H. Power (on/off) switch