BEA SWIFT Adapter - Manual (Page 51)

In this format pattern the separator does not belong to either of the two formats (A
and B). In this case, format A is further divided into two parts A1 and A2. The
separator appears only if either one or both of A1 and A2 is/are present and format
B is also present. Presence of format B is essential for the separator to appear. The
order of the formats is important and should always be maintained.
Example
Field 82a – OPTION B
Format ([/1!a][/34x])[CRLF35x]
Specification (Party Identifier)(Location)
Format in
Designer
([/1!a[/34x]CRLF])35x | (/1!a[/34x])| ([/34xCRLF])35x | /34x
Specification
in Designer
(Party Identifier) (Location) | (Party Identifier) |
(Party Identifier) (Location) | (Party Identifier)
Present in Message Formats: MT521, MT531, MT520, MT522, MT523, MT530
Other Fields Having Similar Pattern:
82a - Option B
88a - Option B
87a - Option B
53a - Option B
54a - Option B
57a - Option B
52a - Option B
Format Pattern
A SEP B
where A is of the format nooflines*maxlinelength (Maximum number of lines times
maximum line length).
Representation
(maxlinelength) SEP B |
in Designer (2*maxlinelength) SEP B |... |
(maxnooflines*maxlinelength) SEP B
This format implies that
A minimum of one line is present in format A along with format B.