BEA SWIFT Adapter - Manual (Page 72)

Adding C05 validation
This validation is to verify that the BIC specified for a field is not a BEI, ie must not
be of subtype BEID, MCCO, TESP or TRCO
1. Add a new validation.
2. Select ‘Type’ as ‘C05’ in the ‘Type’ column.
3. The error code will be automatically set as ‘C05’. You need not change it.
4. Specify the qualifiers, field options, null field and comment properties as specified
earlier.
The description and usage for this validation type will be displayed at the bottom.
See Also:
Specifying properties common for all validations
Adding validations for a sub-field
Removing validations from a sub field
Adding Decimal Validation
This validation is applicable for ‘Amount’ field to validate that the number of digits
following the comma must not exceed the maximum allowed for the specified
currency.
1. Add a new validation.
2. Select ‘Type’ as ‘Decimal’ in the ‘Type’ column.
3. The error code will be automatically set as ‘C03’. You need not change it.
4. Specify the qualifiers, field options, null field and comment properties as specified
earlier.
5. From the Currency Field list-box displayed, select Currency_Code.