Britax Diplomat User Manual
Page 21
19
Rotate seat into forward-facing position.
Verify LATCH strap is not twisted, then attach
remaining LATCH connector to adjacent
LATCH anchor (fig. D).
A positive click confirms attachment.
Push child restraint into vehicle seat while
pulling each LATCH strap tight (fig. E).
Verify all connections and restraint are
secure. The restraint is secure when it
cannot be moved front- to-back or side-to-
side more than 1” (2.5 cm.) at belt path.
If
restraint is not secure, repeat procedure, or use
an alternate seating location or vehicle belt
installation method.
If using Versa-Tether
®
complete Versa-
Tether
®
installation (pages 23-26) and store
excess webbing in tether pouch.
Removal
Disconnect the Versa-Tether
®
from tether anchor if attached.
While pushing restraint firmly into vehicle seat, press red release
buttons on LATCH connectors to release. When not in use, always
store LATCH connectors and Versa-Tether.
5�
6�
•
7�
8�
9�
Installation: Forward Facing
D
E