Removal – Britax Diplomat User Manual
Page 23
21
Hold shoulder belt tight, then rotate lock-
off upward until secured (fig. E).
If your vehicle is equipped with an automatic locking
retractor (ALR), use of lock-offs is not required as
long as ALR is activated. Check your vehicle’s owner’s
manual to determine type of retractor your vehicle
has, and for proper use of retractor.
Verify all connections are secure and restraint
is stable. The restraint is secure when it
cannot be moved front-to-back or side-to-
side more than 1” (2.5 cm.) at belt path. If
restraint is not secure, repeat procedure or
use an alternate seating location.
If using Versa-Tether
®
complete Versa-Tether
®
installation (pages 23-26) and store excess
webbing in tether pouch.
Removal
Disconnect the Versa-Tether
®
from tether anchor if attached.
While pushing restraint firmly into vehicle seat, release lock-off
and vehicle belt.
7�
•
8�
9�
Installation: Forward Facing
D
E