Brother FAX-2840 - Manual (Page 23)

Sending a fax
17
3
Canceling a Broadcast in progress
3
While broadcasting you can cancel the fax
currently being sent or the whole broadcast
job.
a
Press Menu, 2, 7.
The LCD will display the Broadcast job
number followed by the fax number
being dialed (for example, #001
123456789) and the broadcast job
number (for example,
Broadcast#001).
Fax
7.Remaining Jobs
b
Press a or b to choose one of the
following:
 Choose the fax number being dialed,
and press OK.
 Choose the broadcast job number,
and press OK.
c
Press 1 to cancel the fax number or
Broadcast job number you chose in step
b
, or press 2 to exit without canceling.
 If you chose to only cancel the fax
currently being sent in step b, the
LCD will ask you if you want to
cancel the broadcast job. Press 1 to
clear the whole broadcast job or 2 to
exit.
d
Press Stop/Exit.
Real Time Transmission
3
When you are sending a fax, the machine will
scan the documents into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX to On for all documents or
Next Fax:On for the next fax only.
Note
• If the memory is full, the machine will send
the document in real time (even if
Real Time TX is set to Off).
• Next Fax:On or Next Fax:Off can be
selected only if a document is loaded.
Sending in real time for all faxes
3
a
Make sure you are in FAX mode .
b
Press Menu, 2, 2, 5.
Setup Send
5.Real Time TX
c
Press a or b to choose On.
Press OK.
Sending in real time for the next fax
only
3
a
Make sure you are in FAX mode .
b
Press Menu, 2, 2, 5.
Setup Send
5.Real Time TX
c
Press a or b to choose Next Fax:On.
Press OK.