Bayer Esprit - Manual (Page 11)

CHAPTER
Enter Features Mode
5
13 12
CHAPTER
4
Control Test
Move Slide forward.
The Features Mode
Anytime you enter the Features Mode, the following
information is always displayed automatically and in
this order.
1. The number of remaining
Test Sensors left in your
Meter appears with the
present
time and date.
2. The last two test results
appear with the time and date
of the test.
NOTE:
If the Meter is new and no test results are stored in memory,
the Meter will display the number of remaining sensors only.
3. After reviewing the above information, turn the
Meter off.
mmol
L
mmol
L
To Turn the Meter On
in the Features Mode:
➠
5.
Point the Meter down
(over waste container) and
move Slide back all the
way to the end. The Test
Sensor is released to
be discarded.
➠
Button
A
Button
B
Date
Time
Number of Test
Sensors remaining
Button A:
Allows you to move to
the next setting.
Button B:
Allows you to change
the setting.