Bissell 3522 - Manual (Page 10)

10
Troubleshooting
Vacuum cleaner won't run.
Possible Causes Remedies
Power cord not firmly plugged in Check electrical plug.
Blown household fuse or breaker Check/replace fuse - Reset breaker.
Vacuum cleaner won't pick up dirt.
Possible Causes Remedies
Incorrect Height Adjustment Adjust Powerfoot to correct height setting.
Hose wand not attached to suction opening Grasp Quick Reach Handle and firmly push Hose
Wand onto the suction opening.
Twist ‘n Snap Hose not securely attached Make sure Twist ‘n Snap Hose is snapped
into the locked position
Dust Bag is full Replace with new Dust Bag.
Broken or worn Drive Belt Replace Drive Belt.
Rotating Floor Brush bristles worn Replace Brush.
Rotating Floor Brush jammed Remove brush and clean debris from brush ends.
Clog in vacuum Follow instructions for clearing clogs.
Tools won't pick up dirt.
Possible Causes Remedies
Crack or hole in Hose Replace Hose.
Vacuum Hose, Wand or Tools clogged Follow instructions for clearing clogs.
Vacuum cleaner is difficult to push.
Possible Causes Remedies
Incorrect Height Adjustment Turn Floor Surface Selector to next highest setting.
Rotating Floor Brush not rotating Check Drive Belt and Brush.
If suggested remedies do not correct the problem, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. — 10 p.m. ET
Saturday
9 a.m. — 8 p.m. ET
or visit the BISSELL website - www.bissell.com
WARNING:
To reduce the risk of injury
from moving parts and/or
electrical shock, turn Power
Switch OFF and disconnect
polarized plug from electrical
outlet before performing
troubleshooting checks.