Philips MiniVac Aspirador de escoba - Manual (Page 11)

Cleaning the dust compartment thoroughly
1 Press the dust compartment release button (1) and remove the
dust compartment from the appliance (2) (Fig. 14).
2 Pull the filter unit out of the dust compartment (Fig. 15).
3 If necessary, clean the filter unit. See section ‘Cleaning the filter unit’.
4 Empty the dust compartment over a dustbin (Fig. 16).
5 If necessary, clean the dust compartment with a damp cloth.
6 Place the filter unit back into the dust compartment (Fig. 17).
7 To reattach the dust compartment, align the slot on the dust
compartment with the projection on the appliance. First attach the
bottom of the dust compartment. Then push the top of the dust
compartment towards the appliance until it locks into place
(‘click’) (Fig. 18).
Cleaning the filter unit
1 Press the dust compartment release button (1) and remove the
dust compartment from the appliance (2) (Fig. 14).
2 Pull the filter unit out of the dust compartment (Fig. 15).
3 To detach the outer filter from the inner filter, turn the filter outer
filter anticlockwise (1) and pull it off the inner filter (2) (Fig. 19).
4 Clean the inner filter and the outer filter with a brush. If the filters
are very dirty, clean them with a normal vacuum cleaner (Fig. 20).
5 Put the outer filter back onto the inner filter (1) and turn the
outer filter clockwise to lock it (2) (Fig. 21).
6 Place the filter unit back into the dust compartment (Fig. 17).
7 To reattach the dust compartment, align the slot on the dust
compartment with the projection on the appliance. First attach the
bottom of the dust compartment. Then push the top of the dust
compartment towards the appliance until it locks into place
(‘click’) (Fig. 18).
ENGLISH 11