Philips MiniVac Aspirador de escoba - Manual (Page 14)

Problem Solution
Make sure that the dust compartment is attached
properly to the appliance (see chapter ‘Cleaning
and maintenance’).
The vacuum
cleaner does not
work properly
when the floor
nozzle (FC6132),
the hose (FC6130),
the brush tool or
the crevice tool is
attached.
Check if the floor nozzle, the hose, the brush tool
or the crevice tool is blocked. If this is the case,
remove the obstruction.
Check if the dust compartment is full. If it is full,
empty it (see chapter ‘Cleaning and maintenance’).
Check if the filter unit is clogged. If it is clogged,
remove the filter unit and clean the inner and outer
filter (see chapter ‘Cleaning and maintenance’).
ENGLISH 14