Philips MiniVac Aspirador de escoba - Manual (Page 12)

Storage
1 Wind the cord round the body of the appliance (Fig. 22).
2 Fix the cord with the cord clip.
Replacement
Clean Air HEPA filter
The appliance is equipped with the special Clean Air HEPA filter.
This filter removes small particles from the outlet air. This not only
includes normal house dust, but also harmful microscopic vermin such as
house dust mites and their excrements, which are well-known causes of
respiratory allergies.
1 Press the button to release the Clean Air HEPA filter cover (1)
and remove the cover (2) (Fig. 23).
2 Remove the old Clean Air HEPA filter and dispose of it (Fig. 24).
3 Put a new Clean Air HEPA filter in the HEPA filter compartment (Fig. 25).
4 Reattach the Clean Air HEPA filter cover (‘click’) (Fig. 26).
Replacement filters
New inner filters are available under service code: 4222 459 45354.
Contact your Philips dealer or the Philips Consumer Care Centre in your
country.
New Clean Air HEPA outlet filters are available under service code:
4222 459 45355. Contact your Philips dealer or the Philips Consumer
Care Centre in your country.
Recycling
- This symbol on a product means that the product is covered by
European Directive 2012/19/EU. Inform yourself about the local
separate collection system for electrical and electronic products.
Follow local rules and never dispose of the product with normal
household waste. Correct disposal of old products helps prevent
negative consequences for the environment and human health (Fig. 27).
ENGLISH 12