Black & Decker F855 - Manual (Page 8)

8
to get an extra heavy surge of
steam through the soleplate
steam vents.
2. Use Surge of Steam only when
the Heat/Fabric Dial is set in
the steam range.
3. To avoid water spotting, wait a
few seconds between
repeated use of the Surge of
Steam.
STORING THE IRON
1. Turn the Adjustable Steam
Control to DRY.
2. Turn the Heat/Fabric Dial to Fill.
3. Unplug the iron.
4. Allow the iron to cool and wrap
the cord. (Figure G).
5. It is not necessary to empty the
water if the iron is used
frequently.
6. The iron must be stored on its
heel rest to prevent water
leaking from the soleplate.
FABRIC IRONING Refer to the chart on the next page for
CHART recommended Heat/Fabric and Steam
Settings and ironing instructions for
various fabrics. Always read garment labels
and follow manufacturer’s ironing
instructions.
NOTE: Steam and Surge of Steam should only
be used in steam area of the Heat/Fabric Dial.
Water spotting may occur if the setting is too
low.
Figure G