Black & Decker F855 - Manual (Page 9)

9
Care Of The Iron
EMPTYING THE IRON
1. Turn the Heat/Fabric Dial to Fill.
2. Set the Adjustable Steam Control
to the Dry position, and unplug
the iron.
3. Empty the water by holding the
iron over a sink with the tip
pointing downward (Figure H).
Water will empty out of the
Water Fill.
4. If all the water has not drained,
repeat the emptying process.
HEAT/FABRIC ADJUSTABLE STEAM
SETTING SETTING INSTRUCTIONS
No Heat
Fill
Acrylic Dry iron on wrong side of fabric.
Acetate Press washables while damp.
Dry
Silk Dry Iron on wrong side of fabric to prevent shine.
Nylon Press washables while damp.
Polyester Dry Iron washables while fabric is damp.
Rayon Iron Iron rayon fabrics on the wrong side.
At Light Steam iron if fabric manufacturer directs.
Any
Cotton Setting Check care label and follow the manu-
Blends facturer’s instructions for blends; use
Medium the setting for the fiber requiring the
Wool lowest heat.
Blends Use a press cloth to prevent shine.
Wool Steam iron on the wrong side of fabric to prevent
shine, or use a press cloth on right side.
Do not press completely dry.
Cotton Heavy Dry iron washables while damp. Use steam
Linen as needed. Iron dark fabrics on wrong side of
fabric to avoid shine.
Figure H