Broadband Products xDSL/Cable - Manual (Page 20)

Wireless Broadband Router User Guide 16
tion keys (WEP40) and two 128-bits encryption keys (WEP128) to be configured (using either
the ASCII or Hexadecimal format). Please select the one you want to be used when commu-
nicate with the Wireless Router.
WEP Key Setting: The length of a WEP40 key must equal 5, that of a WEP128 key 13. Once
you enable WEP function, Please make sure that the same WEP key is used on both the
Wireless Router as well as the wireless client stations.
Finish Setup Wizard and Save Your Settings
After stepping through the Wizard’s pages, you can go back to correct any modifications or you
can click FINISH. Your modifications take effect when you click on the FINISH button. This will
also save your new settings. Congratulations! You are now ready to use the Wireless Router.
Note: If you change the router’s private address (e.g., from the default of 192.168.1.1 to
192.168.3.1), once you click on FINISH you will no longer be able to communicate
with your Wireless Router. You need to re-boot your computer to re-acquire a new IP
address and the default Gateway from the Wireless Router based on the new private
IP network address.