Broadband Products xDSL/Cable - Manual (Page 9)

Wireless Broadband Router User Guide 5
2. Basic Installation
System Requirements
You must complete the following items before you configure your router:
Install an xDSL/Cable modem with service through an Internet Service Provider
Obtain an Internet access account from an Internet Service Provider
Obtain a Gateway server address and DNS server address from your Internet Service
Provider
Set up a PC on the LAN with a fixed IP address or dynamic IP address assigned via
DHCP
How to Connect Cables to your Wireless Router
The following illustration shows the connectors on the back of the Wireless Router.
Connect cables to these connectors as follows:
Connect up to four workstations to the RJ-45 LAN connectors
Connect to the xDSL or Cable device
Plug the DC adapter power cable to the Wireless Router and a wall electrical outlet
WARNING! Power supply (power adapter) must be removed before you remove or slide
in your PCMCIA Wireless Module into your Wireless Broadband Router.