Hardware configuration, Front view, Led indicators – Broadband Products xDSL/Cable User Manual
Page 8: Rear view
Advertising
Wireless Broadband Router User Guide
4
Hardware Configuration
Front View
LED Indicators
LAN 1-4
LINK/ACT
The green LED will LIGHT when a good link is established, and
BLINK when a packet is being transmitted or received.
WAN
LINK/ACT
The green LED will LIGHT when a remote carrier is connected,
and BLINK when a packet is being transmitted or received.
WLAN
The green LED will LIGHT when wireless LAN is ready, and
BLINK when data are being transmitted or received.
PWR
The green LED will LIGHT if the router is receiving power.
Rear View
DC5V
Connect the DC power adapter
WAN
Connect the xDSL/Cable Modem
LAN 1-4
Connect any wired networking devices, such as PCs, printers or servers
Advertising