Bose GS SERIES III 3.2.1 - Manual (Page 33)

29
S ETUP
Italiano Svenska Deutsch Nederlands English Français Español
2. Insert this plug into the power connector that is
marked
on the Acoustimass ® module.
Note:
On some systems, the Acoustimass
module includes one of two controls.
On 220-240V models only , turn the
POWER switch to on ( l ).
On dual-voltage systems only
, set
the voltage switch for the power
that is appropriate to the region
where you use the system.
3.
Plug the other cable end into the AC (mains) power.
CAUTION:
Bose recommends using a safety agency-
approved surge protector on all electronic equipment.
Voltage variations and spikes can damage electronic
components in any system.
Note: Surge protectors are available at most
electronics stores.
4.
Continue with on the next page. 9
~