Bakers Pride LC - Manual (Page 10)

(vi) INNER PANELS: These are made of Aluminized steel. Use hot soapy water and soft nylon
scrub pads to clean the surfaces.
(vii) DRIP PAN: Drip Pan and the Grease Drawer should be cleaned daily or more often if
necessary.
(B) FOR RADIANT MODELS.
RADIANTS: These should be removed and cleaned frequently. These are stainless steel surfaces.
Stainless Steel Cleaner or any similar cleaner can be used.
(C) FOR GLO-STONE MODELS:
(i) CARE OF GLO-STONES: On a weekly basis, the top grates should be removed and the Glo-
Stones mixed about to break away any carbon deposit so that it falls through the bottom grates.
Spread the Glo-Stones evenly and add only the amount necessary for a single layer.
(ii) CARE OF BOTTOM GRATES: Periodically push all the Glo-Stones to one side and inspect the
bottom grates. If necessary brush the grates with a wire brush.
(iii) BOTTOM GRATE SUPPORT: Frequently clean the Bottom Grate Support with a stiff wire
brush.
CAUTION
Clean the unit only when it is cold.
When cleaning, be sure to rub the metal along grains.
Do not use abrasive pads for cleaning.
Do not use caustic cleaning compounds on aluminized surfaces.
! !
3. CLEANING TOOLS:
Several models of specially designed top grate brushes and grease drain scrapers are available
from Bakers Pride. Contact your local dealer or Bakers Pride for more information.
10