Bowflex SelectTect BDS1642 - Manual (Page 5)

5
step
2
Figure 2
Parts:
• Stand Leg (#4)
• Rear Right Stabilizer (#3)
Hardware Qty
• 3" Screws (#12) 2
• Washers (#11) 4
• Nuts (#10) 2
Tools:
• Hex Key (7/32”)
2-1 Attach the Rear Right Stabilizer (#3) to the Stand Leg (#4) using the hardware shown in Figure 2.
Note: Do not tighten hardware.
�
�
��
��
��
��