Bowflex SelectTect BDS1642 - Manual (Page 9)

9
step
6
Parts:
• Stand base assembly from Step 5
• Right Dumbbell Platform (#6)
Hardware Qty
• 2.75" Screws (#13) 2
• Washers (#11) 4
• Nuts (#10) 2
Tools:
• Hex Key (7/32”)
• Wrench/Socket (9/16”) or Adjustable Wrench
6-1 Secure the Right Dumbbell Platform (#6) to right Stand Leg (#4) using the hardware shown in
Figure 6.
Note: Make sure the screw holes in the Platform are toward the center of the stand.
��
��
��
�
��
Figure 6