Bowflex SelectTect BDS1642 - Manual (Page 6)

Parts:
• Cross Brace (#1)
• Left Stand Leg assembly from Step 1
• Right Stand Leg assembly from Step 2
Hardware Qty
• 3" Screws (#12) 4
• Washers (#11) 8
• Nuts (#10) 4
Tools:
• Hex Key (7/32”)
3-1 Attach the Bottom Cross Brace (#1) to the Rear Left Stabilizer (#2) and Rear Right Stabilizer (#3)
using the hardware shown in Figure 3. Make sure that the narrower edge of the Cross Brace
(#1) is closer to the Stand Leg (#4) uprights.
Note: Do not tighten hardware.
step
3
6
�
�
�
�
�
��
��
��
Figure 3