Philips AquaTrio Système d'aspiration et lavage - Manual (Page 9)

9
4
Turn the cap of the clean water tank
anticlockwise and remove the cap from the
clean water tank.
5
Fill the clean water tank with cold or lukewarm
tap water up to the MAX indication. If you
wish, you can add a few drops of a suitable
liquid floor cleaner (see chapter ‘Important’,
section ‘Floor maintenance’).
D Note:
If you want to use a liquid floor cleaner, first fill
the clean water tank with water. Then add the
quantity of liquid floor cleaner indicated on the
bottle. As the clean water tank has a capacity of
700ml, you only have to add a few drops.
B Warning:
Never use the appliance when the upper body
is not placed on the lower body properly. Never
disassemble the upper body from the lower
body after assembly.
4 Preparing for use
4.1 Filling the clean water tank
Fill the clean water tank before every use.
A full clean water tank provides enough water to
clean a surface area of more than 60m².
1
Place the appliance in upright position. It
automatically locks in parking position (‘click’).
2
Turn the cord storage hook downwards and
remove the cord to gain proper access to the
back of the appliance.
3
Pull up the lever to unlock the clean water
tank and remove the clean water tank. To
prevent the appliance from toppling over,
hold it upright with one hand and remove the
clean water tank with your other hand.
EN
g
LI
sh