Beyonwiz DP-S1 - Manual (Page 35)

STB & PVR Function
28
You can also edit the service list in the list view. This will be explained in
the later section.
NOTE
z You can hide the help message and extend the service list with the
RED button. If you want to display the help message, please press
the RED button again.
3) Other Ways to Change Service
As in conventional TV sets, you can change a service which you want to
watch or listen to in the following ways;
z Service Change with the CH+/CH- buttons: As you press the CH+ or
CH- button, the next or previous service will be selected.
z Service Change with Numeric Buttons: You can change to a certain
service directly with numeric buttons. For example, if you press 1, 4,
and 6 buttons consecutively and then the OK button, service 146 will
be displayed on the screen.
z Recall the Previously Viewed Service: the RECALL button returns to
the previously viewed service.
NOTE
z If you change a service continuously with the CH+ or CH- button,
only the information box will be changed according to your command:
You can watch the changed service 3 seconds after you press the last
button.
z To record two programs simultaneously, two tuners are allocated for
the recording. Therefore, you can only change to a limited number of
services while the two programs are being recorded.
z When selecting channels using the numeric buttons. Make sure you
know the channel number you wish to select as all channels fall on a
different number in each state. Eg: channel 10 isn’t always on
number 10 in the digital network.