Beyonwiz DP-S1 - Manual (Page 78)

Advanced Setup
71
2-3. Initialize
1) Clear Service Information
You can clear all the service information. If you select this with the OK
button, a pop-up window will be displayed to get your confirmation. If
you select “YES” all services will be deleted and you will have to rescan
them again. Otherwise select “NO” or press the EXIT button to return to
the initialize menu.
2) Factory Setting
If factory setting is selected, the DP-S1 will erase all information and
reset itself to the factory configuration. If you select this with the OK
button, a pop-up window will display to get your confirmation. If you
select “YES” the DP-S1 will reset all data to the factory configuration.
Otherwise select “NO” or press the EXIT button to return back to the
initialize screen.
NOTE: After a factory setting all services must be retuned before
viewing.