BT HTC S710 - Manual (Page 26)

26
Make sure you have set up your handset and
your own BT Hub according to the separate
BT Office Anywhere Installation Guide.
This section reminds you how to connect
to additional hubs or wireless routers.
When using Wi-Fi to connect via a BT Home
or BT Business Hub or compatible wireless
router, you are not using the mobile network
to send/receive email, to surf the web and, if
Internet Calling is Selected, to make phone calls.
Internet browsing and file email downloads
will usually be much faster using Wi-Fi and you
will also benefit from lower cost charges.
Before your start this section, make sure you
have all the relevant data about the connection
to which you want to connect such as
network name, network type, wireless
security key type and Wi-Fi name (SSID).
Some of these are optional dependent
upon the connection. Please contact your
IT department or router manufacturer for
this information if you do not know these.
BT offers expert help and advice on BT
products. We will try to help with connection
to non-BT equipment but you may need to
refer to the manufacturer for further help.
Add a new Wi-Fi association
If the Wi-Fi connection you want to connect to
is not in the list you can create a new one. Your
handset will prompt you for a wireless security
key. In many cases as with BT Hubs the wireless
security key is printed on the side of the wireless
router on a grey panel. If this has been changed or
it is not a BT Hub please ask your IT administrator.
Please note non-BT hubs may use other
security standards that the BT Office
Anywhere device does not support.
1. From the Home screen press the Start
Soft Key, select Comm Manager, then
Wi-Fi or press 3. An orange cross
should be shown – if it is then click
icon 3 again to remove it.
Tip for the HTC S710: You will find the following
tasks much easier with the keyboard extended.
Register and use Wi-Fi at other Hubs
8842 HTC S620_S710 UG [1].indd 26 4/6/08 12:58:06