Caution, Display brightness, Door gasket heating control – Liebherr CBNes 6256 PremiumPlus BioFresh NoFrost User Manual

Page 7

Advertising
background image

GB

=

Display brightness

Adjusting the display brightness

• Activate setup mode by touching the SuperFrost icon for 5 sec-

onds.

• Touch the freezer compartment Down icon until appears in

the display.

• Touch the SuperFrost icon.

- The display reads

• Touch the freezer compartment

Up/Down icons to select

0

= minimum to

5

= maximum brightness.

• Touch the SuperFrost icon at the desired value.

• Exit setup mode by touching

the freezer compartment On/Off icon.

=

Door gasket heating control

Condensed water on the gasket of the refrigerator doors can be

eliminated by activating the door gasket heating.

Activating the door gasket heating

• Activate setup mode by touching the SuperFrost icon for 5 sec-

onds

• Touch the freezer compartment Down icon until appears in

the display.

• Touch the SuperFrost icon.

- The display reads

• Touch the freezer compartment

Up/Down icons to select

= at slight condensation of the gasket,

= at heavy condensation of the gasket,

= heater off.

• Touch the SuperFrost icon at the desired value.

• Exit setup mode by touching

the freezer compartment On/Off icon.

= Set BioFresh temperature

The temperature in the BioFresh drawers may be changed.

Setting the BioFresh temperature

• Activate setup mode by touching the SuperFrost icon for 5 sec-

onds.

• Touch the freezer compartment Down icon until appears in

the display.

• Touch the SuperFrost icon.

- The display reads

• Touch the freezer compartment Up/Down icons

and set

6 -

9

to increase the temperature (warmer),

4 -

1

to reduce the temperature.

CAUTION!

For values b4 - b1, the temperature in the drawers can

drop to below 0°C. Food may freeze.

• Touch the SuperFrost icon at the desired value.

• Exit setup mode by touching

the freezer compartment On/Off icon.

= Confirm dust filter cleaning

Once the dust filter in the appliance plinth has been cleaned, the

dust filter LED in the display must be cancelled.

Cancelling the dust filter symbol

• Activate setup mode by touching the SuperFrost icon for 5

seconds.

• Touch the freezer compartment Down icon until appears in

the display.

• Touch the SuperFrost icon.

- The display reads

• Touch the SuperFrost icon.

- The display reads

• The dust filter symbol has been cancelled.

• Exit setup mode by touching

the freezer compartment On/Off icon.

19

Advertising