Equipment, Interior light – Liebherr CBNes 6256 PremiumPlus BioFresh NoFrost User Manual

Page 8

Advertising
background image

BioFresh drawer

Pull the drawer straight out,

grip at the back and lift out.

Inserting the BioFresh

drawer

Place the drawer on the pull-

out rails. The rails must be fully

extended and aligned with the

front of the drawer. Slide the

drawer in.

Repositioning the shelves

1. Hold the shelf underneath

with your hand to prevent

from tipping down back-

wards when removing.

2. Lift the shelf at the front.
3. Pull the shelf towards you

until the round cutout of

the shelf is in line with the

interior light cover.

4. Lift the shelf up and replace

in the desired position.

Removing the shelves

1. Follow the first three steps

in the chapter above.

2. Move the shelf down and

stop just over the vegetable

drawer.

3. Move the front of the shelf

upwards until the shelf is in

a vertical position.

4. Turn the shelf by 90° and

remove.

Equipment

Repositioning the door racks

Lift door rack vertically, lift out to

the front and re-insert at a different

height, following these steps in the

reverse order.

Light cover

Interior light

The interior light is located at the left, right and top in the refrigerator

compartment and above each drawer in the freezer compartment.

It comes on if one of the doors or a freezer drawer is opened.

Caution - class 1M laser radiation. When cover is removed, do

not look directly at light through optical instruments. Severe

eye injury can occur.

The light switches off automatically if one of the doors or a freezer

drawer has been left open for more than 15 minutes. The audible

warning signal sounds at the same time.

If one of the strip lights is not lit, it is defective.

The lighting may only be replaced by the customer service

technician or by competent skilled personnel!

Do not try to change the defective lighting yourself!

Bottle shelf

The shelf above the BioFresh

drawers can be used for stor-

ing bottles horizontally.

Remove the glass plate

and insert it under the shelf

plate.

The recesses in the shelf plate

ensure that the bottles are

stored securely.

When storing tall bottles, the

bottom door rack must be moved

further up.

20

Advertising